CAM75 and CAM100
These Italian shallow well jet pump models have a jet-assisted design suitable for lifting water from shallow suction depths of up to 7m. Rugged cast iron bodies, Noryl impeller with stainless steel shafts with mechanical seals make this unit excellent for supplying water to the larger homes that are more common in Australia. TEFC motors with thermal protection, quiet efficient running and IP44 protected motors make this an excellent choice for home water supply. Press control or Wellmate options are available with this series.
NOTE** pressure tank sold separately.
CAM75 and CAM100 Pump Flow rates
|DISCHARGE PRESSURE kPa / PSI|
|103 / 15||138 / 20||172 / 25||207 / 30||241 / 35||276 / 40||310 / 45||345 / 50||379 / 55||414 / 60|
|Model||kW||Capacity Litres per Minute / Imp. Gallons per Hour|
|CAM75||.59||45 /594||42 / 555||40 / 528||34 / 449||26 / 343||21 / 377||14 / 184||10 / 132|
|CAM100||.74||59 / 779||59 / 779||57 / 752||56 / 739||54 / 713||50 / 660||40 / 528||33 / 436||24 / 317||18 / 238|
CAM75 pump models
CAM75B - This unit is the pump only with a plug and lead.
CAM75P - This unit comes with pressure switch, gauge and lead (Pressure tank not included.)
CAM75C - This unit comes with an electronic controller and lead.
CAM100 pump models
CAM100B - This unit is the pump only with a plug and lead.
CAM100P - This unit comes with pressure switch, gauge and lead (Pressure tank not included.)
CAM100C - This unit comes with an electronic controller and lead.
About Pentax Pumps
Pentax has been manufacturing pumping products in Italy since the early '80s and has now become one of the leading producers of quality Italian pumps. Pentax Water pumps continuously strives to expand its range by manufacturing new products designed to satisfy demanding and selective consumers worldwide who are not only insisting on excellent quality products but are also wanting new innovative products that meet the ever-changing world.
All units are 240 volts, single phase TEFC motors with thermal overloads. All pressure systems include a brass suction check valve (where necessary). Pumps with electronic controllers have check valve in-built. These pumps are designed to pump clean water designated 'potable' (suitable for human consumption) with a nominal power supply of 240 volts, single phase, 50 cycles. They are for domestic/light agricultural use only, and not recommended for heavy-duty industrial applications which may involve arduous operating conditions
'P' units include a pressure switch and pressure gauge. 'P' units are designed to be used with an attached 8L or 18L pressure tank, or a free-standing pressure tank.
'C' or 'MC' units are electronic controllers that will stop the pump approximately 7 seconds from turning off the water flow, or if the incoming water supply is interrupted. This controller also automatically monitors flows down to under 1 LPM. To eliminate cycling. Pumps incorporating the C or MC controller should always be plumbed in as close as possible to the premises being supplied.