The first in the Pentax range that offers a stainless pump casing with corrosion resistance impellor and diffuser made of Noryl. Self-priming, jet assisted suitable for shallow bores or wells. Able to operate multiple outlets within the home with minimal fuss. Pump units come with stainless steel shafts and efficient motors designed for tough conditions. Pentax’s manufacturing system ensures the quality of the product year after year. Made in Italy.
INOX80 and INOX100 Pump Flow Rates
|DISCHARGE PRESSURE kPa / PSI|
|207 30||241 35||276 40||310 45||345 50||379 55||414 60|
|Model||kW||Capacity Litres per Minute / Imp. Gallons per Hour|
|INOX80||.59||31 / 409||28 / 370||25 / 330||20 / 264||16 / 211||11 / 149||7 / 90|
|INOX100||.74||50 / 660||45 / 594||40 / 528||31 / 409||25 / 331||18 / 233||12 / 158|
INOX80 Pump Models
INOX80B - This unit is the pump only with a plug and lead.
INOX80P - This unit comes with pressure switch, gauge and lead (Pressure tank not included.)
INOX80C - This unit comes with an electronic controller and lead.
INOX100 Pump Models
INOX100B - This unit is the pump only with a plug and lead.
INOX100P - This unit comes with pressure switch, gauge and lead (Pressure tank not included.)
INOX100C - This unit comes with an electronic controller and lead.
About Pentax Pumps
Pentax has been manufacturing pumping products in Italy since the early '80s and has now become one of the leading producers of quality Italian pumps. Pentax Water pumps continuously strives to expand its range by manufacturing new products designed to satisfy demanding and selective consumers worldwide who are not only insisting on excellent quality products but are also wanting new innovative products that meet the ever-changing world.
All units are 240 volts, single phase TEFC motors with thermal overloads. All pressure systems include a brass suction check valve (where necessary). Pumps with electronic controllers have check valve in-built. These pumps are designed to pump clean water designated 'potable' (suitable for human consumption) with a nominal power supply of 240 volts, single phase, 50 cycles. They are for domestic/light agricultural use only, and not recommended for heavy-duty industrial applications which may involve arduous operating conditions
'P' units include a pressure switch and pressure gauge. 'P' units are designed to be used with an attached 8L or 18L pressure tank, or a free standing pressure tank.
'C' or 'MC' units are electronic controllers that will stop the pump approximately 7 seconds from turning off the water flow, or if the incoming water supply is interrupted. This controller also automatically monitors flows down to under 1 LPM. To eliminate cycling. Pumps incorporating the C or MC controller should always be plumbed in as close as possible to the premises being supplied.