Poly Flanged Foot Valve

A prominent feature of Poly Flanged Foot Valve is the action applied by two springs that act on an articulated mechanism attached to the closing disc. This design allows a small force in the springs on the articulated mechanism in the valve closed position, managing to keep a closure pressure much greater than would be if the springs were attached directly to the disc. The Valve Body and Screen are made of High-Density Polyethylene and the Working Mechanism is made of 304 Stainless Steel, this makes the unit Resistant to most corrosion. The seals are Made From Nitrile Rubber. Closing contacts use HDPE and Rubber Greatly reduces wear and tear as well as sticking. The closing Mechanism is designed to close early helping to close a moment before the flow is reversed, This helps to reduce water hammer. As the closing mechanism is spring loaded it can be installed at any angle reducing system costs. This Foot valve is designed to be easily inspected for maintenance with the complete operating mechanism being able to be inspected by the removal of 2 bolts. This Product Can be used as a Check Valve, Foot Valve or Suction Screen with the design of separate Valve and Screen. The suction screen has a large opening allowing No extra head loss on use as a Foot Valve.

Size Options

80mm (3") Flanged Poly Foot Valve
100mm (4") Flanged Poly Foot Valve
150mm (6") Flanged Poly Foot Valve
200mm (8") Flanged Poly Foot Valve
250mm (10") Flanged Poly Foot Valve
300mm (12") Flanged Poly Foot Valve

Headloss Chart for Poly Foot Valves

Poly-Flanged-checkfoot-valve-headloss-charts

Dimensions for Poly Foot Valves

Poly Fanged Dimensions

Poly Flanged Foot Valve

Available Options

Have a question?